LED Indoor Rental Display P6.25/P6/P5.33/P5/P4.81/P4/P3.91/P3/P2.5/P2

    • Product Details
    • Company Profile
    • Contact Us

    LED Indoor Rental Display P6.25/P6/P5.33/P5/P4.81/P4/P3.91/P3/P2.5/P2

    1, Cabinet Material: Die-casting aluminum; 
    2, Rapid Deployment: Fast installation design; 
    3, High Contrast: For indoor display we use black LEDs to insure the high contrast.

    Cabinet Structure

    LED indoor rental display

    Installation

    LED indoor rental display

    Explanation:
    1, The two cabinets connect stable by spring lock in horizontal.
    2, The vertical line cabinets connect by Alignment pins, revolving the lock.
    Operation requirement:
    1, The connection between each cabinets should ensure the perpendicularity of each vertical line.
    2, Check the spring lock and alignment pins whether well plugged, if not, correct it.
    LED indoor rental display
    LED indoor rental display

    Hoisting Installation:
    1, 4 screens in a row, use laser level meter to keep it flat.
    2, 1-1 to 1-4 are serial number on cabinets.
    3, Sequence: From the top row of 4-1 to 4-4, second row 3-1 to 3-4, third row 2-1 to 2-4, fourth row 1-1 to 1-4.
    4, Steel structure is higher than led display.
    5, The top horizontal row cabinets connect to hanging beam by alignment pins.
    6, The connection between each cabinets by spring lock, lifting, connector and screws.
    LED indoor rental display
    LED indoor rental display

    Hanging installation:
    1, Install the display in sequence, use laser level meter to keep it flat.
    2, Pay attention to the maximum load bearing of the steel structure.
    3, The top horizontal row cabinets connect to hanging beam by alignment pins.
    4, The connection between each cabinets by spring lock, lifting, connector and screws.

    Connect

    LED indoor rental display


    Signal connect:
    1. Power cables on cabinets
    2. Cabinets on cabinets
    3. Signal cables
    4. Power plug
    5. Signal cables with both end of RJ45 connectors
    6. Computer and displayer connect by signal cable
    7. DVI data cable
    8. USB cable
    9. Displaer data cable

    Description of signal flow:
    Power cable and signal cable start from the left one, connect as S shape.
    Blue for power cable, red for signal cable.
    Attention: One cable can connect 10 cabinets, a sequential cascade for power and signal cables.